Concrete Products | 4 x 4
<< Back
READYSET PAVE PLUS
(An innovative, Cost Effective, High-Early Strength Concrete Technology For Pavement Repairs)
Background:
Highway, municipalities, and airport authorities face major challenges from increasing traffic volumes on existing roadways, urban streets, and airports. Owners must repair or replace deteriorated pavement section while minimizing traffic disruptions. Traditional high-early strength concrete made with rapid setting cements have been plagued with placement difficulties and often exhibit post-placement problems.
Advantages:
ReadySet Pave Plus is highly workable, and meets new demands on concrete paving in commercial, industrial, and residential applications to achieve the highest level of performance. The following special qualities are also provided:
Product Types:
| Name | Flexural Strength | Age |
| 4x6 | 400psi | 6 hrs |
| 4x8 | 400psi | 8 hrs |
| 4x12 | 400psi | 12 hrs |
| 4x18 | 400psi | 18 hrs |
| 6x10 | 600psi | 10 hrs |
| 6x12 | 600psi | 12 hrs |
| 6x18 | 600psi | 18 hrs |
| 6x24 | 600psi | 24 hrs |
| Above Performance @ 80oF and above | ||
Performance Characteristics:
Slump
Air Content
4.5-7%
Thermal Profiling Data
Other Performance Characteristics:
Where To Use:
ReadySet Pave Plus is recommended for use in High Early Flexural Strength Concrete Pavement applications.
Recommendations:
Pre-testing with anticipated materials and similar environmental conditions is highly recommended.
Handling Precaution:
Upon arrival at the project, when all admixtures have been introduced into the mixer drum and adequately mixed, ReadySet Pave Plus must be entirely discharged within 20-30 minutes depending on the ambient temperature.